Table of Contents
Advertisement
Section 6 : Basic Operations
Reserve (continued)
Set Reserve Job (continued)
2
Set Copying Conditions: Reserve Job
1 Touch the active FREE JOB to display the Reserve Job Setting Screen.
Reserve Job Setting Screen
2 Set the desired copying conditions for the reserve job.
When the Reserve Job Setting Screen is displayed, all keys on the LCD and Control
panel will function for the reserve job.
NOTE:
When trouble occurs while setting the reserve job, the PRINT or SCAN JOB key changes to JAM/
ADD PAPER key on the Basic Screen. See p. 6-27 to p. 6-28.
3
Scan Originals: Reserve Job
1 Position original(s) FACE UP in the RADF or FACE DOWN on the platen glass after
completing to scan for the current job. The message "Ready to copy" will be displayed
on the Basic Screen.
2 Press [ START ]. The original for the reserve job will be scanned.
NOTE:
When the message "Please load size ** paper in any tray except tray #" is displayed, load the
specified paper into the tray.
4
Present Job Completed / Start Reserve Job Copying
1 When the scanning for the reserve job is completed, the Basic Screen for the current
printing job will be restored.
2
2 Repeat step
to
3 Copying on the reserve job will start automatically after completing the current job.
6 - 24
3
to reserve more than one job.
Advertisement
Table of Contents
