Paper In Fs-108/108Bm Finisher (Option); Fs-108/108Bm Finisher Primary (Main) Tray; Fs-108/108Bm Finisher Secondary (Sub) Tray - Konica Minolta 7075 Instruction Manual

Section 4 : Paper Information

Paper in FS-108/108BM Finisher (Option)

FS-108/108BM Finisher accepts A3, B4, F4, A4R, A4, B5R, B5, A5R, A5, B6R and A6R
paper sizes. The finisher tray capacities classified according to paper size in each output
mode are described below.
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the
copied sets while the paper is exiting; otherwise mishandled paper will occur.

FS-108/108BM Finisher Primary (Main) Tray

FS-108/108BM Finisher (capacities at 80g/m
Non-sort/Sort/Group mode:
500 sheets
3,000 sheets A4R/A4WR, A4/A4W, B5R/B5WR, B5/B5W
1,500 sheets A3/A3W, B4/B4W, F4
Staple-sort mode:
1,000 sheets* A3/A3W, B4/B4W, F4, A4R/A4WR, A4/A4W, B5/B5W, A5/
NOTE:
*: Variable according to the number of pages to be stapled. See the table below.
Paper Capacity for Staple-sort mode of Finisher FS-108BM
No. of pages
2~9
10~20
21~30
31~40
41~50
Service can set the copier to stop copying when the number of copies
exceeds above capacity. Contact your service centre.

FS-108/108BM Finisher Secondary (Sub) Tray

FS-108/108BM Finisher (capacities at 80g/m
200 sheets Max. 314mm (D) x 445mm (W) ~ Min. 100mm (D) x 148mm (W)
4 - 8
2 , unless otherwise indicated)
A5R/A5WR, A5/A5W
(5.5"x8.5"/5.5"x8.5"W, 5.5"x8.5"R/5.5"x8.5"WR)
(8.5"x11"/8.5"x11"W, 8.5"x11"R/8.5"x11"WR)
(11"x17"/11"x17"W, 8.5"x14")
A5W
(11"x17"/11"x17"W, 8.5"x14", 8.5"x11"/8.5"x11"W,
8.5"x11"R/8.5"x11"WR)
(for the same size only)
A3 B4, F4, A4R, A4, B5, A5
2 staples 1 staple
50 sets 50 sets
50 50
30 30
25 25
20 20
2
, unless otherwise indicated)
2 staples 1 staple
100 sets 100 sets
50 50
30 30
25 25
20 20