Table of Contents
Advertisement
Dual Page
The Dual Page mode performs image division on the original image. Use Dual Page to
copy an open book or a A3/B4 size sheet onto two A4/B5 sheets in 1s1 or 2s1 mode,
or onto the front and back sides of one A4/B5 sheet in 1s2 or 2s2 mode.
The following three modes can be selected from the Dual Page Screen.
1 Facing Pages mode: Image division starts from the first scan.
2 Front Cover + Facing Pages mode: Image division starts from the second scan,
after the first scan copies normally.
3 Front/Back Cover + Facing Pages mode: Image division starts from the third scan,
after the first and second scan copy normally.
Specifications for Dual Page
❒ Store mode will be automatically selected. See p. 6-29 to p. 6-33 for details.
NOTE:
Should memory overflow occur frequently, it is recommended that you contact your Konica service
centre to extend the memory capacity in your machine.
❒ Original size: A3, B4
NOTE:
Originals are not limited in size, however, carefully select an appropriate magnification ratio and
setting orientation when copying original size other than the above.
❒ Paper size: A4, B5
❒ Incompatible Basic Copying Conditions: APS, AMS, Rotation Sort, Rotation Group,
Folding / Stapling & Folding / Trimming with Booklet
❒ Incompatible Basic Copying Conditions: Mixed Original, Tab Paper
❒ Incompatible Applications: Sheet/Cover Insertion, Combination, Image Insert, Program
Job, Repeat, Reduce & Shift in Image Shift, Overlay, Storing image in Overlay Memory
Set original
Section 9 : Applications
1s1 / 2s1 mode
1s2 / 2s2 mode
9 - 27
Image Insert
Dual Page
9
9
Applications
Applications
Advertisement
Table of Contents
