Punching / Z-Folding Mode - Konica Minolta 7075 Instruction Manual

Hide thumbs Also See for 7075:
Table of Contents

Advertisement

Section 7 : Output Modes

Punching / Z-Folding Mode

The Punching / Z-Folding mode is available only when the PZ-108 Punching / Z-Folding
unit option is installed on the FS-108/FS-108BM finisher. With this option, the Punching
mode and Z-Folding mode can be used individually or in combination.
When the Punching and Z-Folding modes are selected in combination with any of the
Primary (Main) tray output modes, each copied sheet is punched and Z-folded, then output
to the Primary tray according to the selected output mode.
NOTES:
1. Some staple positions previously selected may conflict with this function.
2. Special paper type (Thick 2, OHP film, labels, tabbed sheets) and non-standard size (STD size
(special), Non STD size, Wide paper) cannot be punched and Z-folded. Using special paper
will cause the machine trouble.
Specifications for Punching mode
❒ Copy paper size: A3, B4, A4, B5
❒ Paper weight: 60 g/m
Thin paper; 50 g/m
Thick paper; 91 g/m
*: Some 170 g/m
❒ Number of holes: 4 holes
❒ Hole diameter: 6.5 mm ± 0.5 mm
❒ Hole pitch: 80 mm ± 0.5 mm
❒ Incompatible Basic Copying Conditions: Output to Secondary (sub) tray, Rotation Sort,
Rotation Group, Selecting B4 paper in Staple-Sort mode, Folding/ Stapling & Folding/
Trimming mode
❒ Incompatible Special Originals: Mixed Original (A4R, B5R, A5, A5R mixed), Non STD
Size
❒ Incompatible Applications: Booklet, OHP Interleave
Specifications for Z-Folding mode
❒ Copy paper size: A3, B4
❒ Paper weight: 60 g/m
❒ Folded width*: 209 mm or less for A3
181 mm or less for B4
❒ Incompatible Basic Copying Conditions: Selecting tray specified as Tab paper or OHP,
Output to Secondary (sub) tray, Folding/ Stapling & Folding/ Trimming mode, Tandem
mode
❒ Incompatible Special Originals: None
❒ Incompatible Applications: OHP Interleave
❒ When using Z-Folding, Staple-sort and APS for mixed size originals, heed the limits on
capacity specified in the following table.
NOTES:
1.
Some plain paper types may cause folded line to shift in Z-Folding mode.
2. When using Mixed Original mode with Z-Folding mode, A3 and B4 originals should not be
mixed, otherwise the Z-Folding mode may not function properly.
7 - 18
2
2
~ 90 g/m
(80 g/m
2
~ 59 g/m
2
~ 170* g/m
2
paper types may not be punched easily.
All other paper sizes will be output without Z-fold.
2
2
~ 90 g/m
(80 g/m
*The width from the paper edge to the first folded line
2
paper recommended)
2
2
2
paper recommended)

Advertisement

Table of Contents
loading

Table of Contents