Table of Contents
Advertisement
Image Insert
Use the Image insert mode to combine images scanned from the platen glass, such as
photos, paste-ups, newspaper articles, graphs, etc., with images scanned from the
document feeder. Then, output the combined images as a finished set.
The selected copy paper size is determined by the size of originals loaded in the document
feeder.
Specifications for Image Insert
❒ Store mode will be automatically selected. See p. 6-29 to p. 6-33 for details.
NOTE:
Should memory overflow occur frequently, it is recommended that you contact your Konica service
centre to extend the memory capacity in your machine.
❒ Max. image insert: 30 locations, from p. 0 to p. 999
❒ Original size: A3, B4, F4, A4R, A4, B5R, B5, A5R, A5
❒ Paper size: A3, B4, F4, A4R, A4, B5R, B5, A5
❒ Incompatible Basic Copying Conditions: Group, Rotation Sort, Rotation Group
❒ Incompatible Special Originals: Resolution (Very high), Mixed Original, SDF, Tab Paper
❒ Incompatible Applications: Sheet/Cover Insertion, Chapter, Combination, OHP
Interleave, Dual Page, Program Job, Non-image Area Erase, Repeat, AUTO Layout,
Overlay, Storing image in Overlay Memory
Place originals
onto RADF
Place originals
onto RADF
Procedure
1
Preparation
Review pages to be scanned from the document feeder, and note the page number
locations for inserting images scanned from the platen glass.
To insert more than one sheet at the same location, enter the page number repeatedly.
For example, if insertion locations are [2/2/6], scanned platen images will be inserted
as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly after the first scanned Image
insertion.
The third scanned platen image will be inserted after page 6.
8
7
6
5
4
3
2
1
Insertion originals
7
5
3
1
Section 9 : Applications
8
7
6
5
4
3
2
1
7
4
1
9 - 23
OHP
Interleave
Image Insert
9
9
Applications
Applications
Advertisement
Table of Contents
