Table of Contents
Advertisement
Program Job (continued)
2 When scanning for the current JOB is completed, the popup menu will be displayed
in the Basic Screen.
To store the current JOB images, touch DECISION .
To delete the images, touch CANCEL .
Basic Screen
3 Repeat steps 1 to 2 until all JOB originals are scanned.
IMPORTANT: PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER
OF PAGINATION.
3
Select Output Mode/ Enter Print Quantity
Select the desired output mode, and enter the desired print quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
4
Start Copying
Touch STORE to deselect the Store mode.
To delete the scanned data without printing, press [ STOP ],
then touch CANCEL on the popup menu to ensure that
you delete the data.
Press [ START ] to print.
The copier will start printing when ready for output.
To suspend the printing job, press [ STOP ].
After copying is completed, all the scanned data will be
deleted automatically.
Press [ AUTO RESET ] to release the mode and reset the
machine.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to the print quantity selected,
remove the copied sets as they exit; otherwise, mishandled paper will occur.
Section 9 : Applications
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
9 - 33
Program Job
9
Applications
TIM
POWER
ON /
Advertisement
Table of Contents
