Table of Contents
Advertisement
Section 7 : Output Modes
Tandem Mode (continued)
To cancel the tandem copying job:
1 Press [ STOP ] on the control panel of the primary copier.
The scanning/printing job stops immediately, and the
popup menu appears on the Basic Screen of the primary
copier to ask you whether to continue or terminate the
job. At this time, the tandem mode is not released.
2 Touch CONTINUE to go on, or EXIT to delete all the
scanned data and to release the tandem mode.
To cancel the job in the secondary copier only:
1 Press [ STOP ] on the control panel of the secondary copier.
The secondary copier stops the current operation immediately, and the popup menu
appears on the Basic Screen of the secondary copier to ask you whether to continue
or cease the operation. At this time, the tandem mode is not released.
NOTE:
If the temporary suspension takes long in the secondary copier, the Allocation recovery mode will
function for the primary copier to take over the rest of print quantity.
2 Touch CONTINUE to go on, or EXIT to delete all the data transmitted to the secondary
copier and to release the tandem mode.
The primary copier will take over the remaining print quantity and complete the job.
NOTE:
If the Allocation recovery mode is activated and the primary copier already starts taking over the
remaining print quantity, the secondary copier cannot continue the tandem printing job even though
CONTINUE is touched on the popup menu.
7 - 36
TIMER
INTERRUPT
POWER SAVER
ON / OFF
PROOF COPY
STOP
START
Advertisement
Table of Contents
