Table of Contents
Advertisement
Section 6 : Basic Operations
Interrupt Mode (continued)
2
Replace Originals/Set Copying Conditions
1 Remove any document from the platen glass or from the document feeder, if present.
2 Place new original(s) on the platen glass or in the document feeder.
3 The copying settings in Interrupt mode are as follows.
Copy Mode
RADF
AE
Lens Mode
APS
Print Quantity
Finisher
Select other copying features that are compatible with the Interrupt mode, if desired.
3
Start Interrupt Copying
Press [ START ].
4
Press INTERRUPT Button Again
When Interrupt copying is completed, press [ INTERRUPT ] again to return to the settings
of the initial job. The [ INTERRUPT ] LED will go out, and the INTERRUPT indicator will
return to the JOB indicators.
5
Resume Copying
Press [ START ] to resume copying, or load the next batch of originals if RADF memory
copying.
6 - 42
:
1s1
:
ON
:
ON
:
1:1 (1.00)
:
ON
:
1
:
Main Tray; Sort mode
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
TIM
POWER
ON /
Advertisement
Table of Contents
