Table of Contents
Advertisement
Image Insert (continued)
3
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [ C (CLEAR QTY.) ] and enter the correct quantity.
4
RADF: Place/Scan Originals ... FACE UP
Scan the document feeder images.
1 Position originals FACE UP in the document
feeder.
2 Press [ START ] to scan originals.
HINTS:
• For details on positioning originals, see p. 4-4.
• For original and copy paper information, see
Section 4.
5
Platen Glass: Place/Scan Originals ... FACE DOWN
Scan the platen glass images.
1 Open the document feeder.
2 Position an original FACE DOWN on the platen glass,
then close the document feeder.
IMPORTANT: PLACE AND SCAN THE ORIGINALS
ACCORDING TO PAGINATION.
3 Press [ START ] to begin scanning.
4 Remove the original, and repeat for each original.
Be sure to press [ START ] for each original.
NOTE:
Memory overflow may occur during scanning. See p. 14-4.
Section 9 : Applications
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
9 - 25
Image Insert
9
Applications
TIM
POWER
ON /
Advertisement
Table of Contents
