Chapter
Chapter is used with RADF in 1s2 or 2s2 mode for the purpose of locating title pages
on the right side, rather than reverse side, of a duplex copy.
To effectively locate the title page on the right, a blank sheet will be automatically created
on the reverse side of a sheet, if required.
Specifications for Chapter
❒ Scan and store originals into memory, then print all the pages collectively.
NOTE:
Should memory overflow occur frequently, it is recommended that you contact your Konica service
centre to extend the memory capacity in your machine.
❒ Use RADF store mode when the original count exceeds 100.
Use Platen store mode when originals are not suitable for use with the RADF.
See p. 6-29 to p. 6-33 for details.
❒ Title pages: Max. 30 from 1 ~ 999
❒ Copy mode: 1s2 or 2s2 mode only
❒ Use STAMP together with this function to print chapter number onto chapter page in
addition to page number, numbering, or watermark numbering. See p. 9-55 to p. 9-60.
❒ Incompatible Basic Copying Conditions: 1s1, 2s1, Group, Rotation Sort, Rotation
Group, Face Up
❒ Incompatible Special Originals: Resolution (Very high), Mixed Original, SDF, Tab Paper
❒ Incompatible Applications: Combination, OHP Interleave, Image Insert, Program Job,
Non-image Area Erase, Repeat, Storing image in Overlay Memory
1-sided originals
1
2
Title pages
Copies in Chapter mode
Title page
8
7
5
4
3
6
Section 9 : Applications
Title pages
8
6
4
2
1
Title page
2-sided originals
7
5
3
1
9 - 9
Sheet/Cover
Insertion
Chapter
9
9
Applications
Applications