Tandem Mode (continued)
1
Turn Power ON ... Both Copiers
1 Turn power on by pressing the
Power switches of the two
copiers.
2 Confirm that both copiers are
ready to copy with the Basic
Screen displayed.
2
Set Copying Conditions
1 Touch OUTPUT MENU on the Basic Screen of either copier to display the Finisher
Mode Selection Screen.
2 Touch TANDEM on the Finisher Mode Selection Screen to highlight it, then touch
OK .
The copier with TANDEM highlighted will become the primary copier; the other copier
will function as the secondary copier. The Master icon displays on the Basic Screen
of the primary copier to indicate that the two units are ready to work in tandem mode.
NOTE:
The Sub icon will display on the Basic Screen of the secondary copier when [START] is pressed
on the primary copier to start the tandem printing operation.
Basic Screen
Basic Screen (with Master icon displayed)
Finisher Mode Selection Screen
Section 7 : Output Modes
7 - 33
7
Output
Modes
Tandem Mode