Table of Contents
Advertisement
Section 6 : Basic Operations
Paper Size (continued)
Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued)
Special Paper Type/Size Setting Screen
Special Paper Type/Size Setting Screen
• When Wide size paper is highlighted, the popup menu will appear.
Use arrows to scroll to the desired wide size, then specify the precise dimensions of
paper to be used, following the procedure below.
(1) Touch Input size . The Size Input popup menu will be displayed.
(2) Touch the vertical size key to highlight it, then use the keypad on the popup menu
to enter the vertical size, or use arrows to scroll to that number.
The entered number should fall within the range from the vertical size of the
standard size corresponding to the selected wide size to the maximum of 314mm.
(3) Similarly, touch the horizontal size key to highlight it, then use the keypad on the
popup menu to enter the horizontal size, or use arrows to scroll that number.
The entered number should fall within the range from the horizontal size of the
standard size corresponding to the selected wide size to the maximum of 445mm.
(4) Touch Select size to return to the Select Size popup menu.
Touch Lead edge or Rear edge to select the image starting position.
5 Touch OK to return to the Basic Screen.
6 - 22
Advertisement
Table of Contents
