Table of Contents
Advertisement
Job Store (continued)
5 When the Job No. Selection Screen is restored, touch one of the keys numbered
from 1~30 to store the job under that number. The key with a lock icon ( ) displayed
is locked and cannot be selected. Arrow keys can be used to scroll to the next/
previous page. The selected number key will be highlighted.
6 Touch OK on the Job No. Selection Screen to display the Job Name Registration
Screen.
If you do not wish to enter a name, touch OK .
The key displays [ **************** ] in place of a name.
Job Name Registration Screen
7 Enter a job name in up to 16 characters, using the touch screen alphabet keypad.
To correct an entry, touch DELETE repeatedly to delete each character entered,
then enter the correct job name.
8 If the Job name is correct, touch OK to resume the Job No. Selection Screen.
To re-enter the Job name, touch CANCEL to return to the Job Name Registration
Screen.
9 When the Job No. Selection Screen is displayed, touch OK to complete the setting
and return to the Basic Screen.
To exit from the Job Memory setting anytime, press [ AUTO RESET ].
NOTES:
1 A locked job is indicated by a lock icon (
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is stored under that key.
5 The sixteen asterisks displayed on a Job number key indicates that a job is stored but unnamed.
6 Job Memory entries can be recorded on the Job Memory Form included at the end of this
section.
Section 10 : Job Memory
) on the Job key number.
Job Store
10
Job
Memory
10 - 3
Advertisement
Table of Contents
