neighbor advertisement-start
Set the minimum interval before starting to send BGP routing updates.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address}
advertisement-start command.
Parameters
ip-address
seconds
Defaults
none
Command Modes
ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
neighbor allowas-in
Set the number of times an AS number can occur in the AS path.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-group-
name} allowas-in command.
Parameters
ip-address
peer-group-name
number
Defaults
Not configured.
Command Modes
ROUTER BGP
Command History
Version 8.3.11.1
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
Enter a number as the time interval, in seconds, before BGP route
updates are sent. The range is 0 to 3600 seconds.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
Enter a number of times to allow this neighbor ID to use the AS path.
The range is 1 to 10.
Introduced on the Z9000.
361