Config Bgp Delete Aggregate-Address - Extreme Networks ExtremeWare Command Reference Manual

config bgp delete aggregate-address

config bgp delete aggregate-address [<ip address/masklength> | all]
Description
Deletes one or all BGP aggregated route.
Syntax Description
ip address/masklength
all
Default
N/A.
Usage Guidelines
Route aggregation is the process of combining the characteristics of several routes so that they are
advertised as a single route. Aggregation reduces the amount of information that a BGP speaker must
store and exchange with other BGP speakers. Reducing the information that is stored and exchanged
also reduces the size of the routing table.
Example
The following command deletes a BGP aggregate route:
config bgp delete aggregate-address 192.1.1.4/30
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an IP address and netmask length.
Specifies all aggregated routes.
config bgp delete aggregate-address
1043