Config Bgp Add Network - Extreme Networks ExtremeWare Command Reference Manual

config bgp add network

config bgp add network <ip address>/<mask_length> {<route_map>}
Description
Adds a network to be originated from this router.
Syntax Description
ip address
mask_length
route_map
Default
N/A.
Usage Guidelines
The network must be present in the routing table.
Using the
export
config bgp add network
only if the route is present in the routing table. The
individual route from the routing table to BGP. If you use both commands to redistribute routes, the
routes redistributed using the
command.
export
Example
The following command adds a network to be originated from this router:
config bgp add network 192.1.1.14/12
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an IP address.
Specifies a netmask length.
Specifies a route map.
command to redistribute routes complements the redistribution of routes using the
command. The
command take precedence over routes redistributed using the
network
config bgp add network
enable bgp export
config bgp add network
command adds the route to BGP
command redistributes an
1039