Blocking All Incoming Calls (Dnd) - Avaya Scopia XT7100 User Manual

Participating in Meetings

Blocking All Incoming Calls (DND)

About this task
If you do not want to answer incoming calls, you can configure the Avaya Scopia
block all incoming calls by enabling Do Not Disturb (DND).
When the Do Not Disturb feature is enabled:
• The system blocks notifications of incoming calls.
• The
icon appears in the system information area of the monitor display.
• When a remote endpoint calls, the system informs it that you are unavailable and automatically
disconnects the calling endpoint.
You can also temporarily enable Do Not Disturb when receiving an incoming call. To enable, select
Do not disturb on the window which appears when your endpoint rings. To disable, press and hold
Call on the XT Remote Control Unit or from the endpoint's main menu select Turn off Do not
disturb.
Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
2. Set Do Not Disturb to Yes.
3. From the web interface only, select Save.
Related Links
Participating in Meetings
®
Avaya Scopia XT Series User Guide
66
Figure 65: Calling preferences
on page 49
Comments? infodev@avaya.com
®
XT Series to
April 2015