Recall (F03); Programming; Using Privacy; Considerations - Avaya PARTNER Advanced Communications System Installation And Use Manual

Programming

To program a Privacy button:
f00
1. Press
2. Press a programmable button with lights.
f07
3. Press
4. Program another button for this extension, or exit programming mode.

Using Privacy

From a system telephone, press the programmed button to turn Privacy on. Press it again to turn
it off. Use the button like a switch—when the light is on, Privacy is on.

Recall (F03)

Use this feature to send a timed switchhook flash over the telephone line to "recall" a new dial tone
or to access a PBX, central office, or Centrex feature, such as Call Waiting.

Considerations

Using Recall on an intercom call disconnects the call.
Using Recall while recording an intercom call disconnects the call.
Whenever your PBX or Centrex documentation tells you to press the switchhook when you are
on an outside call, use the Recall feature instead. If you are already on a call, most PBX or
Centrex systems require that you press the switchhook to get a new dial tone and then dial a
feature access code to access a specific PBX or Centrex service.
— On a system telephone, press a programmed button or press
— On a single-line telephone, first press and release the switchhook to get intercom dial
tone. Then send a Recall signal by pressing
— On a (single-line) feature telephone that has a Recall or Flash button, first press the
Recall or Flash button to get intercom dial tone. Then send a system Recall signal by
#03
pressing
You can program a Recall button on a system telephone to send a Recall signal with one
touch.
Recall cannot be used with Call Screening (F25).
If users have trouble with Recall, use Recall Timer Duration to adjust the length of the Recall
signal. Your local telephone company can tell you the correct setting—for most Centrex
systems, the correct setting is 800 msec. (or 32).
.
.
.
Programming & Using Telephone Features
8
8
8
8
f03
#03
.
to use Recall.

Recall (F03)

8-53