set pwa enhancedmode
This command enables PWA URL redirection. The switch intercepts all HTTP packets on port 80
from the end user, and sends the end user a refresh page destined for the PWA IP Address
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable PWA enhancedmode:
D2(su)->set pwa enhancedmode enable
Enables or disables PWA enhancedmode.
set pwa enhancedmode
Enterasys D-Series CLI Reference 17-73