Table of Contents
Advertisement
Enter the IP address of the TFTP server and the path and
filename for the history log on the TFTP server. Highlight
APPLY and press enter to make the changes current.
Highlight START and press enter to initiate the file transfer.
Testing Connectivity with Ping
To test the connection with another network device using Ping,
highlight Ping Test and press enter.
Enter the IP address of the network device to be pinged and
the number of test packets to be sent (3 is usually enough).
Highlight START and press enter to initiate the ping
program.
Layer 3 Utilities
Layer 3 (IP Routing) switch operation mode adds BOOTP
Relay and DNS Relay to the utilities available on the switch.
BOOTP/DHCP Relay
To enter the IP addresses of BOOTP or DHCP servers
(for the BOOTP/DHCP Relay service):
86 VH-2402-L3 Management Guide
Figure 1-67. Ping Connectivity Test
9033691-01
Advertisement
Table of Contents
