Table 103: Commands For Monitoring Bgp Settings For The Vpws Address Family; Table 104: Commands For Monitoring Bgp Settings For The Vpws Address; Family - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

There is no no version.
Related Topics
Monitoring BGP-Related Settings for VPWS L2VPNs
This section provides examples of some of the show ip bgp commands that you can
use to monitor VPWS configurations.
You can use the show ip bgp commands listed in Table 103 on page 673 to display
BGP-related settings for VPWS instances in the L2VPN address family. The l2vpn all
keywords display both all VPWS instances and all VPLS instances in the L2VPN
address family

Table 103: Commands for Monitoring BGP Settings for the VPWS Address Family

You can use the show ip bgp commands listed in Table 104 on page 673 to display
BGP-related settings for L2VPNs. Specify l2vpn vpws vpwsName to display information
about only the VPWS instances in the VPWS address family. Specify l2vpn all to
display information about all VPWS instances in the VPWS address family and all
VPLS instances in the VPLS address family.
Table 104: Commands for Monitoring BGP Settings for the VPWS Address Family
Issue the clear ip bgp wait-end-of-rib command and include the l2vpn all
keywords.
host1#clear ip bgp l2vpn all wait-end-of-rib
Configuring BGP Routing on page 3
clear ip bgp
clear ip bgp dampening
clear ip bgp wait-end-of-rib
show ip bgp advertised-routes
show ip bgp l2vpn all
show ip bgp neighbors
show ip bgp neighbors dampened-routes
show ip bgp
show ip bgp community
show ip bgp community-list
show ip bgp dampened-paths
show ip bgp neighbors received-routes
show ip bgp neighbors routes
show ip bgp peer-group
show ip bgp l2vpn vpws
show ip bgp next-hops
show ip bgp paths
show ip bgp quote-regexp
Monitoring BGP-Related Settings for VPWS L2VPNs
Chapter 14: Monitoring VPWS
673