Table 110: Show Mpls Forwarding Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

MPLS next-hop: 9, label 39 on ATM2/0.20, nbr 10.20.20.2
Statistics: Disabled
Table 110 on page 687 lists the show mpls forwarding command output fields.
Meaning

Table 110: show mpls forwarding Output Fields

Field Name
In label
Out label
Label space
Owner
Spoof check
Action
in pkts
in Octets
in errors
in discardPkts
Interface
show mpls forwarding
Related Topics
Field Description
Label sent to upstream neighbor for route
Label received from downstream neighbor for route
Label space in which the label is assigned
Signaling protocol that placed the label in the forwarding table:
BGP, LDP, or RSVP-TE
Type and location of spoof checking performed on the MPLS packet,
router, or interface
Action taken for MPLS packets arriving with that label
Number of packets sent with the label
Number of octets sent with the label
Number of packets that are dropped for some reason before being
sent
Number of packets that are discarded due to lack of buffer space
before being sent
Layer 2 interface that is a member of an L2VPN
Monitoring MPLS Forwarding Table for VPWS
Chapter 14: Monitoring VPWS
687