Monitoring Ldp Targeted Hello Receive And Send Lists - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Table 43: show ldp statistics Output Fields (continued)
Related Topics

Monitoring LDP Targeted Hello Receive and Send Lists

Display LDP targeted hello receive or send list, or both.
Purpose
To display both the LDP targeted hello receive and send lists:
Action
host1#show ldp targeted session
Mpls Target Session Status:
Field Name
Sessions closed
Topology changes
No router id
No address
No interface
No session
No adjacency
Unknown version
Malformed PDU
Malformed message
Unknown message type
Inappropriate message
Malformed tlv
Bad TLV value
Missing TLV
PDU too large
PDU too small
No Memory
show ldp statistics
D = Dynamically, S = Statically, A = Access List Configured
Field Description
Number of session closed events
Number of topology change events
Number of no router ID events
Number of no address events
Number of no interface events
Number of no session events
Number of no adjacency events
Number of unknown version events
Number of malformed PDU events
Number of malformed message events
Number of unknown message type events
Number of inappropriate message events
Number of inappropriate message events
Number of bad TLV value events
Number of missing TLV events
Number of PDU too large events
Number of PDU too small events
Number of no memory events
Monitoring LDP Targeted Hello Receive and Send Lists
Chapter 4: Monitoring MPLS
337