Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 607

Table 73: show mpls interface and show mpls l2transport interface Output Fields
(continued)
Field Name
Queue length
Forwarded packets, bytes
Dropped committed
packets, bytes
Dropped conformed
packets, bytes
Dropped exceeded
packets, bytes
MPLS policy
classifier-group entry
packets, bytes
rate-limit-profile
Committed
Conformed
Exceeded
In label
Out label
MPLS statistics
pkts
hcPkts
octets
hcOctets
errors
discardPkts
Interface
Remote-PE or LSP-name
Monitoring MPLS Layer 2 Interfaces for Layer 2 Services over MPLS
Chapter 8: Monitoring Layer 2 Services over MPLS
Field Description
Number of bytes in the queue
Total number of packets and bytes forwarded by this interface
Total number of committed packets and bytes dropped by this
interface
Total number of conformed packets and bytes dropped by this
interface
Total number of exceeded packets and bytes dropped by this
interface
Type (input, output) and name of policy
Entry index
Number of packets and bytes on the interface
Name of profile
Number of packets and bytes that conform to the committed access
rate
Number of packets and bytes that exceed the committed access
rate but conform to the peak access rate
Number of packets and bytes that exceed the peak access rate
VC label sent by this router to upstream neighbor for route
VC label received by this router from downstream neighbor for
route
MPLS statistics for traffic received or sent
Number of packets received or sent
Number of high-capacity (64-bit) packets received or sent
Number of octets received or sent
Number of high-capacity (64-bit) octets received or sent
Number of packets that are dropped for some reason at receipt or
before being sent
Number of packets that are discarded because of lack of buffer
space at receipt or before being sent
Interface specifier
IP address of the remote PE router or name of the tunnel
571