Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 534

Junose software for e series routing platforms
Table of Contents

Advertisement

JUNOSe 11.1.x BGP and MPLS Configuration Guide
498
Monitoring BGP/MPLS VPNs
IP Statistics Rcvd:
local destination Frames with this router as their destination
hdr errors Number of packets containing header errors
addr errors Number of packets containing addressing errors
unkn proto Number of packets received containing unknown protocols
discards Number of discarded packets
IP Statistics Frags:
reasm ok Number of reassembled packets
reasm req Number of requests for reassembly
reasm fails Number of reassembly failures
frag ok Number of packets fragmented successfully
frag creates Number of frames requiring fragmentation
frag fails Number of packets unsuccessfully fragmented
IP Statistics Sent:
generated Number of packets generated
no routes Number of packets that could not be routed
discards Number of packets that could not be routed that were
discarded
ICMP Statistics Rcvd:
errors Number of error packets received
dst unreach Number of packets received with destination unreachable
time exceed Number of packets received with time-to-live exceeded
param probs Number of packets received with parameter errors
src quench Number of source quench packets received
redirect Number of receive packet redirects
echo req Number of echo request (PING) packets
echo rpy Number of echo replies received
timestamp req Number of requests for a timestamp
timestamp rpy Number of replies to timestamp requests
addr mask req Number of address mask requests
addr mask rpy Number of address mask replies

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x bgp and mplsBgpMpls

Table of Contents