Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 662

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 89: show bridge interface vpls Output Fields (continued)
626
Monitoring Configuration, Statistics, and Status for VPLS Core Interfaces
Field Name Field Description
Operational Status Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Admin Status State of the physical interface: Up, Down
Snmp Link Status Trap Whether SNMP link status processing is enabled or disabled for
the specified interface
Max Learn Maximum number of dynamic MAC addresses that the interface
can learn
Subscriber Policy Name of the subscriber policy currently in effect for the interface
Statistics Displays statistics information for the specified port
In Octets Number of octets received on this interface
In Frames Number of frames received on this interface
In Discards Number of incoming packets discarded on this interface
In Errors Number of incoming errors received on this interface
Out Octets Number of octets transmitted on this interface
Out Frames Number of frames transmitted on this interface
Out Discards Number of outgoing packets discarded on this interface
Out Errors Number of outgoing errors on this interface
Time since counters last Elapsed time since statistics counters were last reset
reset
queue Hardware packet queue associated with the specified traffic class
and interface
Queue length Length of the queue, in bytes
Forwarded packets, bytes Number of packets and bytes forwarded on this queue
Dropped committed Number of committed packets and bytes that were dropped
packets, bytes
Dropped conformed Number of conformed packets and bytes that were dropped
packets, bytes
Dropped exceeded Number of exceeded packets and bytes that were dropped
packets, bytes
vpls vplsName Identifies the VPLS virtual core interface for the VPLS instance