Monitoring Mpls Next Hops; Table 50: Show Mpls Minor-Interface Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

To display summary information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface brief
----------------
pe1-to-pe2
lsp-02020202-1-4
ERX-01-0c-d7:pe1#
Table 50 on page 351 lists the show mpls minor-interface command output fields.
Meaning

Table 50: show mpls minor-interface Output Fields

Related Topics

Monitoring MPLS Next Hops

Display MPLS next hops and any available next-hop statistics.
Purpose
Next hops can be pointed to by MPLS forwarding entries on an LSR, IP or IPv6 routes
on an LER, and VPLS bridge groups.
To display MPLS next hops:
Action
host1:vr2#show mpls next-hop
MPLS next-hop: index 1, lookup on inner header/label
MPLS next-hop: index 2, lookup in router pe1
MPLS next-hop: index 22, ECMP next-hop, leg count 2
MPLS next-hop: index 24, label 17, resolved by MPLS nextHop index 10
10.1.1.1
10.120.120.1
Lower
Interface MplsMajor
---------
ATM2/0.10
ATM2/0.10
Field Name Field Description
Interface Specifier and status of each interface
show mpls minor-interface
Statistics are not collected for MPLS switch-context next-hops
Statistics are not collected for MPLS switch-context next-hops
MPLS next-hop: index 20, label 36 on FastEthernet1/1.120, neighbor 10.120.120.1
MPLS next-hop: index 21, label 36 on ATM2/1.20, neighbor 10.20.20.1
Statistics are not collected for MPLS ECMP next-hops
MPLS next-hop: index 10, resolved by MPLS nextHop index 14, peer address
MPLS next-hop: index 14, ECMP next-hop, leg count 2
MPLS next-hop: index 12, label 32 on FastEthernet1/1.120, neighbor
MPLS next-hop: index 13, label 32 on ATM2/1.20, neighbor 10.20.20.1
Sent:
0 packets
0 bytes
0 errors
0 discards
Oper
state Direction
----- ---------
up transmit
up receive
Monitoring MPLS Next Hops
Chapter 4: Monitoring MPLS
351