Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 654

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Related Topics
Monitoring VPLS Configuration and Statistics for a Specific VPLS Instance
Display configuration and statistics information for the specified VPLS instance.
Purpose
To display configuration information for a specified VPLS (vplsA):
Action
host1#show bridge vplsA
Use the all keyword to display address table and statistics information for all network
interfaces associated with the VPLS instance.
Table 85 on page 619 lists the show bridge command output fields.
Meaning
618
Monitoring VPLS Configuration and Statistics for a Specific VPLS Instance
Monitoring VPLS Configuration and Statistics for a Specific VPLS Instance on
page 618
Monitoring VPLS Configuration and Statistics for all VPLS Instances on page 620
Monitoring Configuration, Statistics, and Status for VPLS Network Interfaces on
page 622
Monitoring Configuration, Statistics, and Status for VPLS Core Interfaces on
page 625
Monitoring Configuration, Statistics, and Status for VPLS Ports on page 627
Monitoring MAC Address Entries for a Specific VPLS Instance on page 629
Monitoring Subscriber Policy Rules on page 630
For more information about using these commands, see Monitoring Transparent
Bridging in the JUNOSe Link Layer Configuration Guide.
BridgeGroup: vplsA(vpls)
Bridge Mode:
Aging Time:
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Port Count:
Interface Count:
Transport Virtual Rtr:
Route Distinguisher:
SiteName:
SiteId:
Multi-homed:
Site-Priority:
SiteRange:
VPLS Route Targets
Route Target: RT:100:1 (both)
Route Target: RT:100:2 (both)
Flood Next Hop: Index 1048577
default
300 secs
Enabled
Unlimited
default Subscriber
2
1
default
1.1.1.1:10
boston
1
Yes
45
10