Monitoring Mpls Interfaces; Table 48: Show Mpls Forwarding Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

host1:vr2# show mpls forwarding brief
Platform label space
In Label
-------- -------- --------------------------------------
28
29
30
31
32
Table 48 on page 343 lists the show mpls forwarding command output fields.
Meaning

Table 48: show mpls forwarding Output Fields

Related Topics

Monitoring MPLS Interfaces

Display status and configuration information about MPLS interfaces.
Purpose
To display information about all MPLS interfaces:
Action
host1:pe1#show mpls interface
MPLS major interface ATM2/0.10
Owner
ldp lookup on inner header/label
ldp swap to 20 on ATM2/0.10, nbr 10.10.10.2
ldp lookup on inner header/label
ldp swap to 22 on ATM2/0.10, nbr 10.10.10.2
ldp swap to 23 on ATM2/0.10, nbr 10.10.10.2
Field Name Field Description
In label Label sent to upstream neighbor for route
Out label Label received from downstream neighbor for route
Label space Label space in which the label is assigned
Owner Signaling protocol that placed the label in the forwarding table:
BGP, LDP, or RSVP-TE
Spoof check Type and location of spoof checking performed on the MPLS packet,
router or interface
Action Action taken for MPLS packets arriving with that label
in pkts Number of packets sent with the label
in Octets Number of octets sent with the label
in errors Number of packets that are dropped for some reason before being
sent
in discardPkts Number of packets that are discarded due to lack of buffer space
before being sent
show mpls forwarding
ATM circuit type is 1483 LLC encapsulation
Chapter 4: Monitoring MPLS
Action
Monitoring MPLS Interfaces
343