Chapter 5 Configuring Bgp-Mpls Applications; Overview - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Chapter 5
Configuring BGP-MPLS Applications

Overview

This chapter contains the following sections:
Overview on page 379
Platform Considerations on page 389
References on page 389
Transporting Packets Across an IP Backbone with MPLS on page 390
Configuring IPv6 VPNs on page 394
Intra-AS IPv6 VPNs on page 395
Providing IPv4 VPN Services Across Multiple Autonomous Systems on page 397
Providing IPv6 VPN Services Across Multiple Autonomous Systems on page 405
Using Route Targets to Configure VPN Topologies on page 406
Constraining Route Distribution with Route-Target Filtering on page 410
Multicast Services over VPNs on page 418
Configuring BGP VPN Services on page 418
Providing Internet Access to and from VPNs on page 461
Carrier-of-Carriers IPv4 VPNs on page 469
Carrier-of-Carriers IPv6 VPNs on page 475
Connecting IPv6 Islands Across IPv4 Clouds with BGP on page 476
OSPF and BGP/MPLS VPNs on page 479
Configuring VPLS on page 487
Configuring L2VPNs on page 487
Monitoring BGP/MPLS VPNs on page 487
NOTE: Before you read this chapter, we recommend you be thoroughly familiar with
both BGP and MPLS. For detailed information about those protocols, see "Configuring
BGP Routing" on page 3 and "Configuring MPLS" on page 267.
379
Overview