Monitoring Ldp Statistics; Table 42: Show Ldp Profile Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

To display the default LDP profile:
Action
host1:pe2#show ldp profile default
ldp profile default: used by 2 interfaces
NOTE: The mpls keyword is optional and is provided for compatibility with non–E
Series implementations.
Table 42 on page 335 lists the show ldp profile command output fields.
Meaning

Table 42: show ldp profile Output Fields

Related Topics

Monitoring LDP Statistics

Display statistics for LDP on the current virtual router.
Purpose
To display all LDP statistics:
Action
host1#show ldp statistics
----------------
Hello
Initialization
Keepalive
Notification
Address
Address withdraw
Label mapping
Label request
Label withdraw
Label release
Label abort
All UDP
All TCP
---------------------
Sessions opened
Sessions closed
session retry: 10 times at interval 10
Field Name Field Description
profile Number of interfaces that use the profile
session retry Number of attempts that will be made to set up an MPLS LDP
session
show ldp profile
Message type Received
--------
25733
9646
25733
9654
Event type Total
-----
Sent
-----
25735
2 2
9646
0 0
2 2
0 0
8 8
0 0
0 0
0 0
0 0
25735
9654
2
0
Monitoring LDP Statistics
Chapter 4: Monitoring MPLS
335