Figure 66: Signaled Mapping - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Figure 66: Signaled Mapping

To define a policy rule that sets the EXP bits in packets to which the policy is applied:
To create or modify an MPLS classifier control list to match on traffic class/color
combination or EXP bits:
To map the specified PHB ID to the internal traffic class/color combination:
To create or modify an MPLS policy:
To enable collection of policy statistics for a tunnel or LSP. Collection is disabled by
default.
Issue the mark-exp command.
host1(config-policy-list)#mark-exp 5 classifier-group claclEXP precedence 32
Issue the mpls classifier-listcommand.
host1(config)#mpls classifier-list be-green traffic-class best-effort color yellow
Issue the mpls diff-serv phb-id traffic-class command.
host1(config)#mpls diff-serv phb-id standard 45 traffic-class gold color green
Issue the mpls policy-list command.
host1(config)#mpls policy-list mpls-exp-setting
Chapter 3: Configuring MPLS
Signaled Mapping for RSVP-TE Tunnels
307