Mpls Features - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 23: MPLS Terms and Acronyms (continued)
Related Topics

MPLS Features

The following major features are currently supported by MPLS:
206
MPLS Features
Term Definition
Tunnel LSP that is used by an IGP to reach a destination, or an LSP that
uses traffic engineering
Conventions for MPLS Topics on page 202
BFD fast failure detection for RSVP-TE adjacencies
Differentiated services
Interface support
ATM AAL5 (RSVP-TE only)
ATM1483 (point-to-point AAL5SNAP only)
Ethernet/VLAN
GRE
Multilink PPP
POS (PPP over HDLC)
PPP
SLEP (Cisco HDLC)
Label stacking
Virtual Private Networks (VR-based and BGP-based)
Layer 2 Services over MPLS
LER functionality
LSR functionality
Spoof checking
LDP graceful restart
ECMP
Topology-driven LSPs (LDP) including support of LDP over RSVP tunnels
Traffic engineering (RSVP-TE)
Constraint-based explicit routing
Statically configured explicit routing
Hop-by-hop routing