Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 658

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 86: show bridge groups details Output Fields (continued)
Related Topics
Monitoring Configuration, Statistics, and Status for VPLS Network Interfaces
Display configuration, statistics, and status information for a specified network
Purpose
interface or for all interfaces assigned to a VPLS instance.
To display information for a specified network interface:
Action
host1#show bridge interface atm 3/1.10
To display information about all interfaces in a VPLS instance, including the VPLS
virtual core interface (vplsB):
host1#show bridge vplsB interface
622
Monitoring Configuration, Statistics, and Status for VPLS Network Interfaces
Field Name Field Description
Flood Next Hop Index of the MPLS next hop to which the router floods packets with
unknown destination addresses. For more information about
displaying MPLS next hops and any available next-hop statistics,
see "Monitoring MPLS Next Hops" on page 351.
show bridge groups
atm3/1.10
BridgeGroup: vplsB
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Trunk
Statistics:
In Octets: 1958
In Frames: 14
In Discards: 1
In Errors: 0
Out Octets: 1930
Out Frames: 14
Out Discards: 1
Out Errors: 0
Time since counters last reset: 00:14:32
queue 0: traffic class best-effort, bound to bridge ATM3/1.10
Queue length 0 bytes
Forwarded packets 14, bytes 2238
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
FastEthernet1/1.1
Port Number: 1