Table 71: Show Mpls Cross-Connects Atm Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
NOTE: For ATM over MPLS interfaces, the ATM-Prot field displays ATM/MPLS.
Related Topics
Monitoring ATM Cross-Connects for Layer 2 Services over MPLS
Display all ATM cross-connects (passthrough connections between local subinterfaces).
Purpose
To display ATM cross-connects:
Action
host1#show mpls cross-connects atm
VC-ID
------ ----- ---- ---- ---------- --- --- ------
600001 AAL5
600002 AAL5
2 local connection(s) found
Table 71 on page 566 lists the show mpls cross-connects atm command output fields
Meaning

Table 71: show mpls cross-connects atm Output Fields

566
Monitoring ATM Cross-Connects for Layer 2 Services over MPLS
show atm subinterface
Cate Peak
Encap gory Rate Interface
UBR 0 ATM6/0.101
ATM6/2.101
UBR 0 ATM6/0.102
ATM6/2.102
Field Name Field Description
VC-ID VC ID number of the connection
Encap Administered encapsulation method based on what was configured
with the atm pvc command
Category Configured service category
Peak Rate Send and receive peak rate, in Kbps
Interface Specifier and status of the first subinterface that makes up the local
cross-connect
VPI Virtual path identifier of the first subinterface
VCI Virtual channel identifier of the first subinterface
Status Current state of the connection
VPI VCI Status
0 101 Up
0 101 Up
0 102 Up
0 102 Up