Table 86: Show Bridge Groups Details Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Junose software for e series routing platforms
Table of Contents

Advertisement

SiteRange:
VPLS Route Targets
No Route Targets configured
Flood Next Hop: Index 1048578
Table 86 on page 621 lists the show bridge group details command output fields.
Meaning

Table 86: show bridge groups details Output Fields

Field Name
BridgeGroup
Bridge Mode
Aging Time
Learning
Max Learn
Link Status Snmp Traps
Subscriber Policy
Port Count
Interface Count
Transport Virtual Rtr
Route Distinguisher
SiteName
SiteId
Multi-homed
Site-Priority
SiteRange
VPLS Route Targets
20
Field Description
Name of the VPLS instance for which information is displayed
Bridging capability currently enabled; for a VPLS instance, this field
always displays default
Length of time, in seconds, that a MAC address entry can remain
in the forwarding table before expiring
Whether acquisition of dynamically learned MAC addresses is
enabled or disabled
Maximum number of dynamic MAC addresses that the VPLS
instance can learn
Whether SNMP link status processing is enabled or disabled
Name of the subscriber policy currently in effect
Number of ports currently configured for the VPLS instance,
including network interfaces and the VPLS virtual core interface
Number of network interfaces currently configured for the VPLS
instance
Name of the transport virtual router configured for the VPLS
instance
Unique route distinguisher configured for the VPLS instance
Site name configured for the VPLS instance
Numerical site identifier configured for the VPLS instance
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed.
Priority value for the VPLS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes
Maximum number of sites that can participate in the VPLS domain
associated with the VPLS instance
Extended community identifiers, also known as route targets, for
each VPLS instance configured on the router
Monitoring VPLS Configuration and Statistics for all VPLS Instances
Chapter 11: Monitoring VPLS
621

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x bgp and mplsBgpMpls

Table of Contents