Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 224

JUNOSe 11.1.x BGP and MPLS Configuration Guide
show ip bgp paths
show bgp ipv6 paths
show ip bgp peer-group
show bgp ipv6 peer-group
188
Monitoring BGP
Indirect next-hop 5.5.5.5
Reachable (metric 2)
Direct next-hop atm2/0.35 (35.35.35.5)
Reference count is 3
Indirect next-hop 6.6.6.6
Reachable (metric 3)
Direct next-hop atm2/0.34 (34.34.34.4)
atm2/0.35 (35.35.35.5)
Reference count is 3
Indirect next-hop 13.13.13.1
Not reachable
Reference count is 2
See show ip bgp next-hops.
See show bgp ipv6 next-hops.
Use to display information about BGP paths.
This command displays only the most common path attributes. BGP internally
maintains additional attributes that are not displayed for example, the MED,
local preference, and communities attributes.
Field descriptions
Address Hexadecimal number that uniquely identifies the path attributes
Refcount Number of routes that share the path attributes
Origin Value of the origin path attribute
Next-hop Value of the next-hop path attribute
AS-path Value of the AS-path attribute
Example
host1#show bgp ipv6 paths
Address Refcount
0x4B311118 1
0x4C548224 1
0x4C548530 1
0x4C548704 2
See show ip bgp paths.
See show bgp ipv6 paths.
Metric AS-path
100
0 100
0 200
0 300