Monitoring Vpls Configuration And Statistics For All Vpls Instances - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Related Topics

Monitoring VPLS Configuration and Statistics for all VPLS Instances

Display configuration and statistics information for all VPLS instances configured on
Purpose
the router.
To display the names of all VPLS instances configured on the router:
Action
host1#show bridge groups
To display configuration settings for all VPLS instances on the router:
host1#show bridge groups details
620
Monitoring VPLS Configuration and Statistics for all VPLS Instances
show bridge
BridgeGroup: vplsA(vpls)
BridgeGroup: vplsB(vpls)
BridgeGroup: vplsA(vpls)
Bridge Mode:
Aging Time:
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Port Count:
Interface Count:
Transport Virtual Rtr:
Route Distinguisher:
SiteName:
SiteId:
Multi-homed:
Site-Priority:
SiteRange:
VPLS Route Targets
Route Target: RT:100:1 (both)
Route Target: RT:100:2 (both)
Flood Next Hop: Index 1048577
BridgeGroup: vplsB(vpls)
Bridge Mode:
Aging Time:
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Port Count:
Interface Count:
Transport Virtual Rtr:
Route Distinguisher:
SiteName:
SiteId:
Multi-homed:
default
300 secs
Enabled
Unlimited
default Subscriber
2
1
default
1.1.1.1:10
boston
1
Yes
45
10
default
300 secs
Enabled
Unlimited
default Subscriber
2
1
default
1.1.1.1:11
boston
1
No