Monitoring Rsvp-Te Hello Adjacency Instances - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Related Topics

Monitoring RSVP-TE Hello Adjacency Instances

Display summary or detailed information about RSVP-TE hello adjacency instances.
Purpose
To display summary information about RSVP-TE hello adjacency instances:
Action
host1#show mpls rsvp hello instance
Address
--------
10.1.1.2
10.3.1.2
The following output shows that the two peers are identified as RSVP-TE node hellos
peers:
host1#show mpls rsvp hello instance
Address Interface Interval Miss Limit State
-------- --------- -------- ---------- ------
10.1.1.2 <any>
10.3.1.2 <any>
11.2.3.1 Atm3/1.3 10000
To display detailed information about RSVP-TE hello adjacency instances:
host1#show mpls rsvp hello instance detail
Neighbor 10.1.1.2 on interface ATM6/1.1
Table 59 on page 364 lists the show mpls rsvp hello instance command output fields.
Meaning
show mpls rsvp hello graceful restart
Up neighbor is up
GR graceful restart is in progress
Peer
Interface Interval
--------- --------
ATM6/1.1 10000
ATM6/0.3 10000
Up neighbor is up
GR graceful restart is in progress
Peer
10000
10000
Local Address 10.1.1.1
Restart Time: 60000 msecs
Recovery Time: 120000 msecs
State: Up
SrcInstance 0x4379F084
DstInstance 0x4379EA19
Interval : 10000
Miss Limit : 4
Hellos Sent : 0
Hellos Received : 382
Hellos Suppressed : 381
Hello Acks Sent : 382
Hello Acks Received : 0
Miss Limit State
---------- ------
4 Up
4 GR
4 Up
4 GR
4 GR
Monitoring RSVP-TE Hello Adjacency Instances
Chapter 4: Monitoring MPLS
363