Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 227

show ip bgp quote-regexp
show bgp ipv6 quote-regexp
show ip bgp regexp
show bgp ipv6 regexp
Status: Withdraw
Advertise-map is alternatetoR1
Condition-map: trigger2
Sequence: 10
Status: Advertise
See show ip bgp peer-group.
See show bgp ipv6 peer-group.
Use to display information about BGP routes whose AS-path matches the specified
regular expression.
Use with only a single regular expression element.
You can use output filtering.
You must enclose any elements containing a space within quotation marks ("
element" ).
Regular expressions match numbers for which the specified path is a
substring for example, if you specify 20, 200 matches because 20 is a substring
of 200. You can disallow substring matching by using the underscore (_)
metacharacter to constrain matching to the specified pattern, for example, _20_.
Reports whether the indirect next hop of a route is unreachable; if not, displays
the IGP cost to the indirect next hop.
If you filter the display with field options, the usual introductory information
about BGP attributes is displayed only if you issue the intro fields option. See
show ip bgp for descriptions of the fields displayed by this keyword.
See show ip bgp quote-regexp.
See show bgp ipv6 quote-regexp.
Use to display information about BGP routes whose AS-path matches the specified
regular expression.
Use with one or more regular expression elements.
You cannot use output filtering.
You do not have to enclose elements containing a space within quotation marks.
Regular expressions match numbers for which the specified path is a
substring for example, if you specify 20, 200 matches because 20 is a substring
of 200. You can disallow substring matching by using the underscore (_)
metacharacter to constrain matching to the specified pattern, for example, _20_.
Reports whether the indirect next hop of a route is unreachable; if not, displays
the IGP cost to the indirect next hop.
Chapter 1: Configuring BGP Routing
191
Monitoring BGP