Table 43: Show Ldp Statistics Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Topology changes
No router id
No address
No interface
No session
No adjacency
Unknown version
Malformed PDU
Malformed message
Unknown message type
Inappropriate message
Malformed tlv
Bad TLV value
Missing TLV
PDU too large
PDU too small
No Memory
NOTE: The mpls keyword is optional and is provided for compatibility with non–E
Series implementations.
Table 43 on page 336 lists the show ldp statistics command output fields.
Meaning

Table 43: show ldp statistics Output Fields

336
Monitoring LDP Statistics
Field Name Field Description
Hello Number of hello messages received and sent
Initialization Number of initialization messages received and sent
Keepalive Number of keepalive messages received and sent
Notification Number of notification messages received and sent
Address Number of address messages received and sent
Address withdraw Number of address withdraw messages received and sent
Label mapping Number of label mapping messages received and sent
Label request Number of label request messages received and sent
Label withdraw Number of label withdraw messages received and sent
Label release Number of label release messages received and sent
Label abort Number of label abort messages received and sent
All UDP Number of UDP messages received and sent
All TCP Number of TCP messages received and sent
Sessions opened Number of session opened events
5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0