Features - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
NOTE: IETF drafts are valid for only 6 months from the date of issuance. They must
be considered as works in progress. Please refer to the IETF Web site at
http://www.ietf.org for the latest drafts.

Features

Some of the more important BGP features supported by the E Series router are the
following:
16
Features
RFC 4721 Graceful Restart Mechanism for BGP (January 2007)
RFC 4893 BGP Support for Four-octet AS Number Space (May 2007)
Subcodes for BGP Cease Notification Message draft-ietf-idr-cease-subcode-05.txt
(March 2004 expiration)
Access lists
Advertisement intervals
Aggregation
BGP/MPLS VPNs
Communities
Confederations
EBGP multihop
IBGP single hop
Highly scalable BGP-4 architecture
Multicast
Next-hop self
Peer groups
Route dampening (also referred to as route damping)
Route mapping and attribute manipulation
Route origins
Route redistribution
Route reflectors
Soft-reconfiguration inbound
Synchronization enabling and disabling
Update source