Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 716

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Interface Local-Site-Id
---------- -------------
ATM2/0.122 1
ATM2/0.123 1
ATM2/0.124 3
ATM2/0.121 3
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
CM = Control Word Mismatch
LN = Local Site not Designated
RN = Remote Site not Designated
Local Remote
Site Site State
----- ------ -----
1 2 UP
1 3 UP
3 1 UP
3 2 UP
To display detailed information about connections for a specific VPWS instance:
host1#show l2vpn connections instance l2vpn1 details
L2VPN: l2vpn1
Interface
----------
ATM2/0.100
ATM2/0.12
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
DN = VC Down because Remote PE Unreachable
LD = Local Site Down
RD = Remote Site Down
AS = Max BGP AS path length exceeded
OL = No Out Label
CM = Control Word Mismatch
680
Monitoring VPWS Connections
Admin
Remote-Site-Id state
-------------- -------
2 enabled
3 enabled
1 enabled
2 enabled
Remote
PE In-label
------- -------------
2.2.2.2 35
implicit-null
implicit-null
2.2.2.2 55
Encapsulation Type ATM AAL5 SDU VCC transport
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name westford Site Id 1
Multihomed priority 200
Route Targets:
Route Target: RT:100:2 both
Local-Site-Id
-------------
1
1
Oper
state
-----
up
up
up
up
MPLS
Out-label NH Idx
------------- --------
84 0000001d
implicit-null 2d000008
implicit-null 2d000007
86 0000001d
Admin
Remote-Site-Id state
-------------- -------
2 enabled
3 enabled
Up-down
Time
--------
01:50:40
02:24:45
02:24:45
01:50:40
Oper
state
-----
up
up