Inheritance Of Configuration Values; Table 9: Commands Affecting Only The Current Address Family For The Specified Peer Or Peer Group - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 8: Commands Affecting All Address Families for the Specified Peer or Peer
Group (continued)
Table 9: Commands Affecting Only the Current Address Family
for the Specified Peer or Peer Group

Inheritance of Configuration Values

Peer groups inherit all configuration values that are globally configured. However,
attributes configured for a peer group override inherited global configuration values.
Individual peers that are members of peer groups inherit all configuration values
20
Basic Configuration
neighbor ibgp-singlehop
neighbor lenient
The commands listed in Table 9 on page 20 configure parameters separately
for each address family exchanged over the BGP session. If you configure these
parameters for a peer or peer group that is activated in more than one address
family, the values are affected only for the current address family. The inbound
route map is such a parameter; the following example demonstrates that a BGP
session can have a different inbound route map for each address family.
host1(config-router)#neighbor 1.1.3.4 remote-as 1234
host1(config-router)#neighbor 1.2.3.4 route-map ucast-map in
host1(config-router)#address-family ipv4 multicast
host1(config-router-af)#neighbor 1.2.3.4 activate
host1(config-router-af)#neighbor 1.2.3.4 route-map mcast-map in
host1(config-router-af)#exit-address-family
neighbor activate
neighbor advertise-map
neighbor allowas-in
neighbor as-override
neighbor default-originate
neighbor distribute-list
neighbor filter-list
neighbor local-as
neighbor maximum-prefix
neighbor next-hop-self
neighbor next-hop-unchanged
neighbor update-source
neighbor weight
neighbor peer-group
neighbor prefix-list
neighbor prefix-tree
neighbor remote-private-as
neighbor route-map
neighbor route-reflector-client
neighbor send-community
neighbor send-label
neighbor soft-reconfiguration inbound
neighbor unsuppress-map