To Install An Mbm; Installing An Mbm; Returning The System To Operation - Nortel BCM200 Installation And Maintenance Manual

254 Chapter 21 Replacing a media bay module

Installing an MBM

After removing the old MBM, follow the steps in this section to install the new MBM.

To install an MBM

1 Set the DIP switches on the new MBM to match the settings of the old MBM.
2
Refer to "Installing an MBM" on page 136

Returning the system to operation

To return the system to operation, refer to
N0060612 N0060612
to install the MBM into the media bay.
"Restarting the system after maintenance" on page 234.