Chapter 15
Using Telset Administration to set the basic
parameters
Telset Administration allows you to use a digital telephone with a two-line display to set the BCM
configuration parameters. You cannot set all the basic parameters using Telset Administration.
Therefore, after configuring the initial parameters, you must use Element Manager to set the
startup parameters. Refer to
Refer to the BCM 4.0 Telset Administration Guide for more information on Telset Administration.
Figure 95
shows an overview of using Telset Administration to set the basic parameters.
Figure 95 Overview of using Telset Administration
Chapter 15 Using Telset Administration to set the basic parameters
"Configuring the startup parameters" on page
BCM200/400 4.0 Installation and Maintenance Guide
189
200.