Nortel BCM200 Installation And Maintenance Manual page 312

312 Chapter 24 Replacing data cards and processing hardware
Figure 168 Modem port label
7
If applicable, install the modem card guide pin on the main card. Ensure the modem card guide
pin aligns with the correct opening on the main card (see
Figure 169 Modem card guide pin installation
8 Carefully grasp the modem card with your fingertips.
9 Install the modem card in the correct location on the main card. Ensure the modem card pins
correctly align with the main card modem connectors and modem guide pin.
10 Gently push in a downward direction on the modem card with your fingertips. Ensure the
modem card seats correctly in the main card modem connectors.
11 If applicable, install the modem RJ-11 interface to the base function tray faceplate. Ensure the
modem RJ-11 interface connector is on the right side (as shown in
12 If applicable, connect the RJ-11 modem card connector to the main card socket and the RJ-11
interface (see
N0060612 N0060612
Install the modem guide pin
into the main card
Modem guide pin
Figure 167).
Remove modem port label
Figure 169).
Main card
Figure 167).