94
Chapter 6 Installing the BCM main unit
Figure 53 Attach the rack-mount bracket to the BCM400 main unit
Figure 54 Attach the mounting bracket to the expansion unit
To mount the main unit in an equipment rack
1
Determine the location in the rack where you want to install the main unit.
2
Position the main unit in the rack. Have an assistant hold the main unit.
3
Align the holes in the rack-mount bracket with the holes in the equipment rack rails.
4
Fasten the rack-mount brackets to the rack using the four supplied screws (see
Figure
56, or
N0060612
N0060612
Figure
57).
Install rack-mount
bracket screws
Figure
55,