Bcm200 Main Unit - Nortel BCM200 Installation And Maintenance Manual

32 Chapter 2 Introducing the BCM hardware

BCM200 main unit

Figure 1 illustrates the BCM200 main unit, and
Figure 1 BCM200 main unit components
Tray latch
Table 1 BCM200 main unit component descriptions
Component
Base function tray
Tray latch
Media bay module (MBM)
bays
MBM ejectors
Figure 2 shows the location of the BCM200 main unit internal components.
internal components.
N0060612 N0060612
Base function tray
Description
The sliding base function tray provides call processing functions and interface
connections. See "Base function tray component hardware" on page
The tray latch enables you to remove the base function tray.
The MBM bay is a slot into which you install an MBM. The BCM200 main unit has two
MBM bays. See "Media bay modules (MBMs)" on page
The MBM ejector enables you to remove an MBM from the MBM bay.
Table 1 describes the main unit components.
MBM bays
Tray latch
MBM
ejectors
39.
51.
Table 2 describes the