Global Analog Trunk Parameters - Nortel BCM200 Installation And Maintenance Manual

372 Appendix H Market profile attributes

Global analog trunk parameters

This section contains information for the GATM4 and GATM8 MBMs. The information in the
tables applies to downloaded profiles only; it is not applicable to DIP switch modes.
Global analog trunks are not supported in the following market profiles: Denmark, France,
Germany, Holland, Italy, Norway, Spain, Sweden, and Switzerland.
For PRC and Hong Kong, analog trunks are available in North American DIP switch mode only.
The global analog trunk parameters are provided in the following tables:
• Localization, PSTN standards, and pulse dialing parameters (see
• Transmission parameters (see
• Call supervision parameters (see
• On-hook caller ID, disconnect supervision, and message waiting parameters (see
Table 102 Localization, PSTN standards, and pulse dialing parameters (Sheet 1 of 2)
Market profile Localized
Australia Yes
Brazil Yes
CALA No
(North American
based A-law)
Canada Yes
Caribbean Yes
Global No (North American
based A-Law)
Mexico Yes
New Zealand No (UK-based
telephony with
Australian tones)
North America Yes
N0060612 N0060612
Table 103)
Table 104)
PSTN standards
[1] AS/ACIF S003:2005 (2nd
Edition) — Customer Access
Equipment for Connection to a
Telecommunications Network
[2] AS/ACIF S002:2001 —
Analogue interworking and
non-interference requirements for
Customer Equipment for
connection to the Public Switched
Telephone Network
[1] Identification of the Calling Party
for SPC With DTMF, 220-250-713.
[2] Si3050 Global Voice/Data Direct
Access Arrangement Specification.
N/A
N/A
N/A
N/A
[1] Mexico general Specification,
June 9, 1993
N/A
N/A
Table 102)
Table
Pulse Dialing (ms)
Break Make Interdigit
time time time
85 15 860
66 34 800
60 40 700
60 40 700
60 40 700
60 40 700
60 40 700
66 34 740
60 40 700
105)